Ssh Upload to Remote Server With Config File

Remote server configuration

Use this dialog to configure deployment entries for your remote project (CMake or Makefile). You can use FTP/SFTP/FTPS protocols to admission the remote host.

To configure access to the server in this setup, you need to specify the following:

1. Connection settings: server host, port, and user credentials.

2. The server configuration root binder and the URL address to access it.

3. Correspondence between the project root folder, the folder on the server to re-create the data from the project root folder to, and the URL address to access the copied data on the server. This correspondence is called mapping.

Specify the name, blazon, and visibility of a server configuration

1. Press Ctrl+Alt+S to open up the IDE settings and select Build, Execution, Deployment | Deployment.

   Alternatively, from the main carte du jour, select .

2. In the left-manus pane that lists all the existing server configurations, click and select the server configuration blazon depending on the protocol you lot are going to use to exchange the data with the server.

   • FTP: choose this option to have CLion admission the server via the FTP file transfer protocol.

   • SFTP: choose this pick to have CLion access the server via the SFTP file transfer protocol.

   • FTPS: choose this choice to have CLion admission the server via the FTP file transfer protocol over SSL (the FTPS extension).

   • WebDAV: choose this selection to accept CLion access the server via the WebDAV file transfer protocol (the WebDAV extension).

3. In the Create New Server dialog that opens, blazon the name of the connection to the server and click OK. The Create New Server dialog closes and yous return to the Connection tab of the Deployment node.

4. Click on the toolbar to have CLion silently apply the current configuration in the following cases:

   • Automatic upload of changed files.

   • Manual upload and download of files without choosing the target host.

   • Comparing local files and folders with their remote versions.

   • Editing individual files on remote hosts.

5. Use the Visible only for this projection checkbox to configure the visibility of the server access configuration.

   • Select the checkbox to restrict the use of the configuration to the current projection. Such configuration cannot be reused outside the current project. It does non announced in the listing of available configurations in other projects.

   • When the checkbox is cleared, the configuration is visible in all CLion projects. Its settings can be reused beyond several projects.

Specify user credentials divers during registration on the host

1. For FTP and FTPS servers, specify the registration mode:

   • To login in a regular mode, specify the login in the User name field.

   • To enable anonymous access to the server with your email address equally password, select the Login as anonymous checkbox.

2. Specify the way to authenticate to the server:

   • For FTP and WebDAV servers, blazon your password and select the Save password checkbox to have CLion call up it.

   • For SFTP server, choose ane of the created SSH configurations, or click and create a new configuration as described in Create SSH configurations.

   • For FTPS server, specify your username and countersign. In the Advanced settings area, choose the security mechanism to utilize.

     • Choose Explicit to have the explicit (active) security applied. Immediately afterward establishing connection, the FTP customer on your machine sends a command to the server to establish secure command connection through the default FTP port.

       This method is selected past default.

     • Choose Implicit to take the implicit (passive) security practical. In this example, security is provided automatically upon establishing connectedness to the server, which appoints a dissever port for secure connections.

       Note that this method is considered deprecated, and using information technology is discouraged.

Enable connectedness to the server and specify the server configuration root

1. For FTP/FTPS/WebDAV servers, specify the host name of the server to commutation information with and the port at which this server listens. The FTP/FTPS, the default value for the port is 21. For WebDAV, the default value is 6180.

   For SFTP servers, the values specified in the selected SSH configuration are used.

2. In the Root path field, specify the server configuration root relative to the root folder on the server. This folder volition be the highest one in the folder structure accessible through the electric current server configuration.

   Do i of the post-obit:

   • Accept the default / path, which points at the root folder on the server.

   • Type the path manually or click and select the desired folder in the Cull Root Path dialog that opens.

   • Click Autodetect. CLion detects the user domicile binder settings on the FTP/SFTP server and sets up the root path according to them. The button is only enabled when you have specified your credentials.

3. In the Web server URL field, type the URL address to admission the server configuration root. The server configuration root is the highest binder in the file tree on the local or remote server accessible through the server configuration. For in-identify servers, it is the project root.

   Both the HTTP and the HTTPS protocols are supported.

4. Click in the field to make certain that the specified server root URL address is accessible and points at the correct Web folio.

5. (Optional) For SFTP servers, select Use Rsync for download/upload/sync to have CLion apply Rsync for uploading and downloading files, which tin increase file transfer speeds.

   Click the Rsync Settings link and configure Rsync settings in the dialog that opens:

   • Provide the paths to the rsync and ssh executables.

     • On macOS and Linux, the rsync and ssh tools are preinstalled and their paths are filled automatically.

     • On Windows, you lot need to manually install Cygwin with the rsync and openssh packages first. The tools' executables are commonly located in the <Cygwin installation>\bin folder.

   • If necessary, override the Rsync command-line parameters in the Rsync options field.

     By default, the -zar options are used, so that Rsync will compress the transferred data (z), preserve permissions, ownership, and timestamps of transferred files and folders (a), and recurse into subdirectories (r).

     For the complete list of available options, refer to the Rsync documentation.

Map local folders to folders on the server and the URL addresses to access them

Configure mappings, that is, ready correspondence between the project folders, the folders on the server to copy projection files to, and the URL addresses to admission the copied data on the server. The easiest way is to map the entire project root folder to a binder on the server. The projection folder construction in this case will be repeated on the server, provided that you accept selected the Create Empty directories checkbox in the Options dialog.

1. Printing Ctrl+Alt+S to open the IDE settings and select Build, Execution, Deployment | Deployment.

   Alternatively, from the principal card, select .

2. Click the Mappings tab.

3. In the Local Path field, specify the full path to the desired local binder. In the simplest case it is the project root.

4. In the Deployment Path field, specify the folder on the server where CLion volition upload the data from the folder specified in the Local Path field. Type the path to the folder relative to the server configuration root.

   If the folder with the specified proper name does non be yet, CLion volition create it, provided that you have selected the Create Empty directories checkbox in the Options dialog. For more details, see Customize upload and download.

5. In the Spider web Path field, blazon the path to the folder on the server relative to the server configuration root. Actually, type the relative path you typed in the Deployment Path field.

Overloading the deployment destination past configuring nested mappings

You lot can configure divide mappings for a specific binder under your project root to have the contents of this folder synchronized with another location on the remote host.

Suppose you take configured the mappings equally follows:

Local Path	Deployment Path
<project_root>	ftp://.../htdocs/my_project
<project_root>/my_folder	ftp://.../htdocs/my_folder

Then the files in your project will exist uploaded equally follows:

Local Path	Deployment Path
<project_root>/file1.js	ftp://.../htdocs/my_project/file1.js
<project_root>/my_folder/file2.js	ftp://.../htdocs/my_folder/file2.js instead of ftp://.../htdocs/my_project/my_folder/file2.js

Last modified: 12 April 2022

swinksund1982.blogspot.com

Source: https://www.jetbrains.com/help/clion/creating-a-remote-server-configuration.html

Share this post